Employee Details




Dr Md Alamgir Hossain

Professor
Faculty of Mechanical Engineering
ahossain@me.mist.ac.bd


Education:
   PhD
Swinburne University of Technology (SUT, Australia)
Year Obtained: 2005

  Bachelor of Science in Mechanical Engineering
Year Obtained : 1999
Bangladesh University of Engineering and Technology (BUET)

Teaching Experience:

  1. Assistant Professor

March 2006 to September 2006, Textile Dept, Primeasia University, Dhaka

  1. Assistant Professor

December 2006 to May 2013, ME Department, MIST

  1. Associate Professor

June 2013 to November 2015, ME Department, MIST

  1. Professor

December 2015 to till to date, ME Department, MIST

Subjects Taught:
ME 421: Fluid Machinery
ME 341: Machine Design (I & II)
ME 321: Fluid Mechanics
ME 353: Mechanics of Solid
ME 253: Engineering Mechanics
ME 261: Numerical Analysis

Research Area:

CFD, Simulation

Professor Dr Md Alamgir Hossain on ResearchGate

List of Publications:

INTERNATIONAL JOURNALS:

  • ALAMGIR Hossain,RAHID Zaman, MIFTAUR Rahman, RAIHAN Masud, FARDAN Abdullah, Yeasin A. Bhuiyan,”Design and Kick Analysis of a Soccer Playing Robot”, Applied Mechanics and Materials, Vols 541-542 (2014) pp 1087-1091 (@(2014) Trans Tech Publications, Switzerland); doi 10.4028/www.scientific.net/AMM.541-542.1087 (LINK)
  • Dr M A. Hossain, M I. Islam, S A. Ratul, MT U R. Erin, “Heat Transfer Co-efficient and Effectiveness for Water Using Spiral Coil Heat Exchanger: A Comprehensive Study ”, Global Engineering, Science and Technology Journal, Vol 1, Issue 1, 2013, pp 12-22 (LINK)
  • Almostasim Mahmud,Dr. Md. Alamgir Hossain, M. A. Muktadir, “Design Optimization and Installation of the Evaporative Cooler in the Perspective of Bangladesh”, International Journal of Emerging Technology and Advanced Engineering, Vol 2, Issue 11, 2012, pp 741-749. (LINK)
  • Hossain, Shabab M. Chowdhury, Yamin Rekhu, Khandakar S. Faraz, Monzur Ul Islam, “Biodiesel from Coconut Oil : A Renewable Alternative Fuel for Diesel Engine”, Journal of Wold Academy of Science, Engineering and Technology, Issue 68, pp 1289-1293, 2012.(LINK)
  • Hossain, A., and Naser, “CFD Investigation of Particle Deposition in a Horizontal Looped Turbulent Pipe Flow.” Journal of Environmental Modeling and Assessment, Springer, DOI: 10.1007/s10666-011-9252-8, Vol 16, No 3, 2011: pp 359.(LINK)
  • Hossain, A., Naser, J., and Imteaz, M. “Extension of Analytical Turbulent Diffusion Model for Particle Dispersion and Deposition in a Horizontal Pipe Flow: Comparison with CFD Simulation.” Journal of Environmental Modeling and Assessment, Springer, DOI: 10.1007/s10666-010-9248-9, Vol 16, No 4, 2011: pp 295.(LINK)
  • Hossain, A., Hasan, F., and Seraz, AFMT., “Development of Design and Manufacturing of a Fixed Wing Radio Controlled Micro Air Vehicle (MAV)”. MIST Journal, Vol 3, No 3, 2011.(LINK)
  • Hossain, A.; Naser, J.; Imteaz, M., “CFD Investigation of Turbidity Spikes for Different Velocity and Particle Load Profiles in a Horizontal Pipe.” Australian Journal of Water Resources, Vol. 14, No. 1, 2010: pp 63-73.
  • Hossain, A., and Naser, “CFD investigation of particle deposition in a turbulent flow through horizontal pipe loop with 4 bends.” Journal of Engineering Science, Vol 1, pp 61-73, 2010.
  • Hossain, A., and Naser, J. “Analytical and CFD investigation of turbulent diffusion model for particle dispersion and deposition in horizontal pipe flow.” Journal of Mechanical Engineering, Vol 40, Issue 1, 2009.(LINK)

INTERNATIONAL PROCEEDINGS

  • Aziz Rahman, Al Amin,Alamgir Hossain, Brian Fleck, “Numerical Investigation of Two-Phase Nozzle Flow”, Proceedings of 10th International Conference on Mechanical Engineering, ICME 2013, 20-21 June 2014, BUET, Dhaka, DOI: 10.13140/2.1.4860.0964 (LINK)
  • A. Hossain, M. L. Rahman, S. M. Chowdhury, M. Shahriyar, and K. Shahnawaz, “Analysis of Extension the Sun-Ray Travel Path and Developed a Solar Container to Disinfect Flood Water by Solar Heat”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2013 (ICMERE2013) 1-3 May 2014, Chittagong, Bangladesh, ICMERE-2013-PI-114, DOI: 10.13140/2.1.3025.0881 (LINK)
  • Alamgir HossainAziz Rahman, Rahid Zaman, Miftahur Rahman, Raihan Masud, Md. Mizanur Rahman Mizan, Yasin Arafat, Fardan Abdullah, “Development of an Integrated Vision System to Control a Soccer Playing Humanoid Robot”, Proceedings of 4th Global Engineering, Science and Technology Conference 27-28 December, 2013, BIAM Foundation, Dhaka, Bangladesh ISBN: 978-1-922069-43-6 (LINK)(RECEIVED BEST PAPER AWARD)
  • Alamgir Hossain, Aziz Rahman, Rahid Zaman, Miftahur Rahman, Raihan Masud, Md. Mizanur Rahman Mizan, Yasin Arafat, Fardan Abdullah, “Development of an Integrated Vision System to Control a Soccer Playing Humanoid Robot”, Proceedings of 4th Global Engineering, Science and Technology Conference 27-28 December, 2013, BIAM Foundation, Dhaka, Bangladesh ISBN: 978-1-922069-43-6(LINK)
  • ALAMGIR Hossain, RAHID Zaman, MIFTAUR Rahman,RAIHAN Masud, FARDAN Abdullah,Yeasin A. Bhuiyan, “Design and Kick Analysis of a Soccer Playing Robot”, Proceedings of 2013 International Conference on Control, Mechantronics and Automation, 6-7 December 2013, Sydney, Australia (LINK)
  • Hossain, Shabab M. Chowdhury, Monzur Ul Islam and H M Alamin, “Analysis of Exhaust Gas Emissions in a Diesel Engine Operating with Diesel and Biodiesel Blends” Proceedings of the 6thInternational Mechanical Engineering Conference & 14thAnnual Paper Meet (6 IMEC&14 APM) 28-29 September 2012, Dhaka, Bangladesh.
  • Dr M A. Hossain, M I. Islam, S A. Ratul, MT U R. Erin, “Comprehensive Study on Heat Transfer Co-efficient and Effectiveness for Water Using Spiral Coil Heat Exchanger”, Proceedings of Global Engineering, Science and Technology Conference, 28-29 December 2012, Dhaka, Bangladesh (RECEIVED BEST PAPER AWARD)
  • Dr A Hossain,M Shahriyar, K Shahnawaz and N Ahmed, Design and Manufacturing of a Solar Container as to Disinfect Water for Flood Affected People, Proceedings of the 6thInternational Mechanical Engineering Conference & 14thAnnual Paper Meet (6 IMEC & 14 APM) 28-29 September 2012, Dhaka, Bangladesh.
  • Hossain, A., Islam, M. S., Chowdhury, M. M. H., Sabuj, M. N. H., Bari, M. S., “Performance Evaluation of 1.68 kWp DC-Operated Solar Pump with Auto Tracker using Microcontroller based Data Acquisition System”, PI-RT-30, 9thInternational Conference on Mechanical Engineering (ICME 2011), BUET, Dhaka, December 16-17, 2011. (LINK)
  • Hossain, A., Chowdhury N. A., Linda R I, Akhtar S., “Design and manufacturing of a stair climbing vehicle”, Proceedings of International Conference on Industrial Engineering and Operations Management, Dhaka, Bangladesh, January 9 – 10, 2010.
  • Hossain, A.and Naser, J. “Analytical and CFD investigation of turbulent diffusion model for particle dispersion and deposition in horizontal pipe flow.” Journal of Mechanical Engineering, Vol 41, Issue 1, 2009: pp 3.
  • Hossain, A.Petkova, S., “CFD investigation of blood flow in human portal vein with and without thrombosis.” A short course on ‘Biomedical Instrumentation’ DCE, BUET, 3-7 May 2008
  • Hossain, A., and Naser, J., “CFD Analysis of Turbidity Spikes Movement for Unsteady Turbulent Flow in a Horizontal Pipe.” 4th BSME-ASME Int Conf on Thermal Engineering, Dec 2008, IUT, Dhaka.
  • Hossain, A., Jamal Naser, A. M. K. McManus, and Greg Ryan. “CFD Investigation of Particle Deposition and Dispersion in a Horizontal Pipe.” Third International Conference on CFD in the Minerals and Process Industries, Melbourne, Australia, 2003.
  • Petkova, S.,Alamgir Hossain, Jamal Naser, and E. Palombo. “CFD modelling of blood flow in portal vein hypertension with and without thrombosis.” Third International Conference on CFD in the Minerals and Process Industries, CSIRO, Melbourne, Autralia, 2003.
  • Hossain, A., and Jamal Naser. “CFD Investigation of Particle Deposition around Bends in a Turbulent Flow.” Proceedings of the Fifteenth Australasian Fluid Mechanics Conference. Sydney, NSW 2006, Australia, 2004.
  • Hossain, A., Uttam Kumar Chakrabarti, Nasim Shahriar, and Md. Ehsan. “Development of a Mechanism for Mixing Two Different Gases at Constant Proportion for Variable Flow Rates. “Proceedings of the 6th Annual Paper Meet and International Conference” Institute of Engineers, Dhaka, Bangladesh, 2000.

PRESENTATIONS:

  • Dr Md Alamgir Hossain,“Equipment Reliability and Energy Conservation using Ultrasound Technology” Kafco, Chittagong, 28 January 2012.
  • Dr Md Alamgir Hossain, “Importance and Selection of Lubricant”, Seminar on Pertamina Lubricating Oil Promotion in Bangladesh, Organized by SAJ Engineering and Trading Company, Dhaka, 14 November 2012.
  • Hossain, A., “Potential Sources of Alternative Energy in Bangladesh.”Prospect of Energy Auditing and Alternative Energy to Meet the Present Energy Crisis in Bangladesh, Organizer: ME Dept., MIST, October 2010
  • Hossain, A., “CFD investigation of blood flow in human portal vein with and without thrombosis.” A short course on “Biomecical Instrumentation” DCE, BUET, 3-7 May 2008
  • Petkova, S., Alamgir Hossain, and E. Palombo.“Blood Flow Simulations of Human Portal Vein.” Australian Fluent Users’ Group Meeting (UGM), Melbourne (December. 2004).
  • Hossain, A., and A. M. K. McManus. “Mathematical Turbulent Diffusion Model for Particle Dispersion in a Horizontal Pipe.” Short Course in Computational Fluid Dynamics (CFD), SUT, Australia (December 2003).
  • Hossain, Alamgir and Jamal Naser. “CFD Investigation of Turbidity Spikes in Drinking Water Distribution Networks, Melbourne”.Particle Workshops, CSIRO, Highett, Australia (November, 2002).